ExactMats - Clear Placemats
Create Your Own Custom Size
Crystal
Our Crystal Placemats protect your surface while providing a smooth glass-like finish and an unparalleled look. It is ideal for protecting non-glossy, slightly rough, matte, and porous surfaces. Made in the USA
Both sides of this material are ultra smooth allowing for a full and unobstructed view of the surface beneath.
- Clear Smooth Glass-Like Vinyl
- 2.03 mm Thick - High-Grade Placemat Protection
- Easy to Clean
- Fully Transparent Glass-Like Clarity
- BPA & Phthalate Free - California Prop 65 Compliant
- Ultra Smooth Texture on Both Sides of Material
- Waterproof, Tearproof, & Puncture-Resistant
- Absorbs Impact and Dampens Sound
- Ideal for Non-Glossy & Wood Grain Surfaces
- Best for Dining Room Tables & Kid's Craft Tables
Riverstone
Our Riverstone Placemats protect your surface while providing a versatile pebbled finish. It is ideal for protecting all surfaces including sleek and glossy surfaces. Made in the USA
It can be used with textured side up to allow micro airflow beneath items placed or textured side down to prevent clinging on sleek or glossy surfaces.
- Clear Pebble-Textured Vinyl
- 2.03 mm Thick - High-Grade Placemat Protection
- Easy to Clean
- BPA & Phthalate Free - California Prop 65 Compliant
- Smooth Texture on Top, Pebbled Texture on Bottom for Optimized Breathability
- Waterproof, Tearproof, & Puncture-Resistant
- Absorbs Impact and Dampens Sound
- Ideal for All Surfaces including High-Gloss & Sleek Surfaces
- Best for Sleek Dining Room Tables & Vanity Tables
Squared Corners
Ideal For: Shelf, Floor & Table Surfaces
Best For: Table Surfaces with Square Corners
Rounded Corners
Ideal For: Drawer, Shelf, Countertop, Floor & Table Surfaces, providing a Finished Look
Best For: Table Surfaces with Rounded Corners
Corner Radius
Our default Corner Radius value is 1/4" (0.25 inches).
Alternatively, you can modify the Corner Radius value to best match your surface's corner radius.
For example, if your dining room table has a corner radius of 2 - 1/2" (2.5 inches), then input 2 - 1/2 into the Corner Radius field.
Note: Corner Radius value will apply to all 4 corners.
To measure corner radius, refer to the featured diagram:
Cut Corners
Ideal For: Countertop, Floor & Table Surfaces, providing a Clean Look
Best For: Table Surfaces with Cut Corners
Note: Input your Max Length into the Length Field and your Max Width into the Width Field
Cut Distance
Our default Cut Distance value is 1/4" (0.25 inches).
Alternatively, you can modify the Cut Distance value to best match your surface's cut distance.
For example, if your coffee table has a cut distance of 5 - 5/16" (5.3125 inches), then input 5 - 5/16 into the Cut Distance field.
Note: Cut Distance value will apply to all 4 corners.
To measure cut distance, refer to the featured diagram:
